The formula behind it
posts = ⌊run ÷ spacing⌋ + 1; pickets = run ÷ (picket width + gap)- spacing
- post interval — 2.4 m (8 ft) is the common wood default
- gap
- space between pickets; 10 mm default, zero for a privacy fence
Fence material counts are three simple divisions: posts from spacing (add the end post — N gaps need N+1 posts), pickets from their width plus gap, and rails from rows × run. The post line reports the ACTUAL spacing after dividing evenly, because stretching the last bay to close the run is how fences end up crooked. Concrete for post holes is estimated at 0.02 m³ each — adjust for your hole diameter and depth.
How to use this calculator
- 1
Enter the total run in meters and your post spacing (2.4 m default).
- 2
Enter picket width and gap (0 gap = privacy fence), and rail rows.
- 3
Press Calculate — posts, pickets, rail meters and hole concrete appear.
Worked examples
Backyard run
30 m at 2.4 m spacing, 90 mm pickets + 10 mm gaps, 2 rails → 13 posts, 300 pickets, 60 m of rail.
Privacy fence
Same run with 140 mm boards, 0 gap → 214 boards.