Drywall Calculator

Sheets, screws and tape for a room, ceiling optional.

The formula behind it

sheets = [2(L+W)H − openings + ceiling?] ÷ sheet area × (1 + waste)
openings
doors 1.8 m² and windows 1.5 m² each (typical) — counts are yours to set
waste
10% default for cuts and breakage; complicated rooms want 15%

Drywall takeoff multiplies the wall perimeter by height, subtracts openings, optionally adds the ceiling, and divides by the sheet area — then adds waste, because sheets are cut to fit and offcuts rarely align with the next need. The screw and tape lines use trade rules of thumb (≈23 screws per m², ≈1.1 m tape per m²) so the order covers fastening too, not just boards.

How to use this calculator

  1. 1

    Enter the room's length, width and wall height.

  2. 2

    Count doors and windows; toggle the ceiling on if you're boarding it too.

  3. 3

    Set the sheet size (1.2 × 2.4 m default) and waste %.

  4. 4

    Press Calculate — sheets, screws and tape appear together.

Worked examples

Bedroom

4 × 4 m, 2.5 m high, 1 door + 2 windows, walls only: (35.2) ÷ 2.88 = 12.2 → 14 sheets with 10% waste.

With ceiling

Same room boarding the 16 m² ceiling → 17.8 sheets → 20 sheets.

Frequently asked questions

Explore more categories

Command Palette

Search for a command to run...