AI Paint Quantity Calculator

Describe the job (“4×3 m room, 2.7 m ceilings, 2 coats, one door and two windows”). The calculator computes wall area from the perimeter × height, subtracts door (1.8 m²) and window (1.5 m²) openings, multiplies by coats and divides by your paint's coverage (10 m²/L typical) to give liters to buy. Estimates assume average absorbency — dark-to-light recoats often need an extra coat or primer.

Ask in plain words

The AI reads your question and fills in the parameters; a verified calculator engine does every calculation.

AI interpretation is currently switched off — the manual fields below still give you the exact computed result.

How to use the AI Paint Quantity Calculator

  1. Choose room dimensions or a known wall area.
  2. Enter dimensions/area, doors and windows (subtracted at fixed allowances).
  3. Set coats (2 standard) and your paint's coverage per liter from the can.
  4. Press Calculate for liters needed per coat and in total — round up to can sizes.

How the calculation works

Room mode: wall area = 2 × (L + W) × H; openings subtracted at 1.8 m²/door and 1.5 m²/window (standard allowances). Paint liters = paintable area × coats ÷ coverage (m²/L). Coverage defaults to 10 m²/L — always prefer the value printed on your can; porous or dark surfaces reduce it.

Example questions

  • “Room 4x3 m, 2.7 m high, 2 coats, 1 door 2 windows”
  • “Walls: perimeter 18 m, height 2.5 m, 3 liters coverage per wall — how much paint?”
  • “Paint 40 m² of wall, 2 coats, coverage 12 m²/L”

Prefer doing it yourself? These dedicated calculators run the same verified formulas.

Questions you type are sent to the configured AI provider only to extract parameters; they are not stored. Results are computed locally by deterministic engines and are not advice.

Command Palette

Search for a command to run...